NEW Stock available...
Inline AllinOne - Scale 1/32
Ref. NR3D2102421
High performance 3D Inline replacement chassis to improve your model handling and speed in all kinds of tracks.
Built-in Inline motor mount with All-In-One flex design, allowing 2 or 4 suspension/fixing points with several setup options**.
Rear axle with 0,0mm offset and with support for conventional bearings or ball bearings (diameter: 4.75mm).
Compatible with NR3D front suspension system. Description with assembly instructions available for download here.
Front axle height can be adjusted using bushings and M2 screws.
No additional trimming required for proper fit.
Original interior should be replaced by lexan interior or similar. With some extra work original interior can be cut and adapted to work with in line motor configuration.
Light weight and strong.
Parts supplied: Chassis, 4x 1mm spacers, 4x spring stoppers for front suspension option, and specific rear suspension top clamping bar.
** See product photos for more informations about chassis setup.
Inline AllinOne - Scale 1/32
Ref. NR3D2002251
High performance 3D Inline replacement chassis to improve your model handling and speed in all kinds of tracks.
Built-in Inline motor mount with All-In-One flex design, allowing 2 or 4 suspension/fixing points with several setup options**.
Rear axle with 0,0mm offset and with support for conventional bearings or ball bearings (diameter: 4.75mm).
Compatible with NR3D front suspension system. Description with assembly instructions available for download here.
Front axle height can be adjusted using bushings and M2 screws.
No additional trimming required for proper fit.
Original interior should be replaced by lexan interior or similar. With some extra work original interior can be cut and adapted to work with in line engine configuration.
Light weight and strong.
Parts supplied: Chassis, 4x 1mm spacers, 4x spring stoppers for front suspension option and specific rear suspension top clamping bar.
** See product photos for more informations about chassis setup.
Inline AllinOne - Scale 1/32
Ref. NR3D2102411
High performance 3D Inline replacement chassis to improve your model handling and speed in all kinds of tracks.
Built-in Inline motor mount with All-In-One flex design, allowing 2 or 4 suspension/fixing points with several setup options**.
Rear axle with 0,0mm offset and with support for conventional bearings or ball bearings (diameter: 4.75mm).
Compatible with NR3D front suspension system. Description with assembly instructions available for download here.
Front axle height can be adjusted using bushings and M2 screws.
No additional trimming required for proper fit.
Original interior should be replaced by lexan interior or similar.
Light weight and strong.
Parts supplied: Chassis, 4x 1mm spacers, 4x spring stoppers for front suspension option and specific rear suspension top clamping bar.
** See product photos for more informations about chassis setup.
Inline AllinOne - Scale 1/32
Ref. NR3D1901671
High performance 3D Inline replacement chassis to improve your model handling and speed in all kinds of tracks.
Built-in Inline motor mount with All-In-One flex design, allowing 2 or 4 suspension/fixing points with several setup options**.
Rear axle with 0,5mm offset and with support for conventional bearings or ball bearings (diameter: 4.75mm).
Front axle height can be adjusted using bushings and M2 screws.
Compatible with NR3D front suspension system. Description with assembly instructions available for download here.
Original cockpit must be replaced.
No additional trimming required for proper fit.
Slot.it flat motors compatible.
Light weight and strong.
Parts supplied: Chassis, 4x 1mm spacers, 4x spring stoppers for front suspension option and specific rear suspension top clamping bar.
AW/SW/Inline (Combo) - Scale 1/32
Ref. NR3D1700381
High performance 3D anglewinder / sidewinder / inline replacement chassis to improve your model handling and speed in all kinds of tracks.
Fit all Fly Ford Capri RS Turbo using Slot.it Anglewinder/Sidewinder/Inline motor mounts.
Front axle height can be adjusted using Slot.it bushings (CH56) and M2 screws.
Original cockpit must be replaced by a lexan cockpit.
No additional trimming required for proper fit.
Chassis with detachable covers for each type of engine mounting.
Light weight and strong.
AW/SW/Inline (Combo) - Scale 1/32
Ref. NR3D1700671
High performance 3D anglewinder / sidewinder / inline replacement chassis to improve your model handling and speed in all kinds of tracks.
Fit all NINCO Toyota Supra using Slot.it Anglewinder/Sidewinder/Inline motor mounts.
Front axle height can be adjusted using Slot.it bushings (CH56) and M2 screws.
Original cockpit must be trimmed or replaced by a lexan cockpit with Inline and Anglewinder configurations.
No additional trimming required for proper fit.
Chassis with detachable covers for each type of engine mounting.
Light weight and strong.
Inline - Scale 1/32
Ref. NR3D1801091
High performance 3D Inline replacement chassis to improve your model handling and speed in all kinds of tracks.
Built-in Inline motor mount with All-In-One flex design, allowing 2 or 4 suspension/fixing points with several setup options**.
Rear axle with 0.5mm offset and with support for conventional bearings or ball bearings (diameter: 4.75mm).
Front axle support compatible with NationalRacers3D Front Axel Upgrades for Fly Trucks V2.0. Supplied with built-in Medium/Hard standard stiffness support. Available separately with 3 stiffnesses: SOFT - MEDIUM - HARD.
Front axle com be used with conventional bearings or ball bearings and height can be adjusted using M2 screws**.
Some trimming required for proper fit with suspension at rear of body **.
We recommend the use of single flange bearings or ball bearings to avoid damaging the brackets.
Light weight and strong.
Parts supplied: Chassis, front axle support Medium/Hard, 4x 1mm spacers and suspension top clamping bar.